The STAT3 （Signal transducer and activator of transcription 3） BioAssay ELISA Kit （Human） is a quantitative sandwich assay for the detection of STAT3 in human serum，plasma，tissue homogenates and other biological fluids.Detection Range：0.313-20ng/mlSensitivity：<0.188ng/mlPrecision： Intra-Assay CV： <8%Inter-Assay CV： <10%Assay Principle：The microtiter plate provided in this kit has been pre-coated with an antibody specific to STAT3. Standards and samples are added to the appropriate microtiter plate wells followed by a biotin-conjugated antibody specific to STAT3. Streptavidin conjugated to Horseradish Peroxidase （HRP） is added to each microplate well and incubated. After TMB substrate solution is added，only those wells that contain STAT3，Biotin-conjugated antibody and enzyme-conjugated Streptavidin complex will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of STAT3 in the sample is then determined by comparing the O.D. of the sample to the standard curve.Kit Components：*359055A： Microtiter Strips，8x12 wells.*359055B： Standard，2 vials359055C： Sample/Standard Dilution Buffer，1x20ml359055D： Antibody-Biotin （Concentrated），1x120ul359055E： Antibody Dilution Buffer，1x10ml*359055F： Streptavidin-HRP Conjugate （SABC），1x120ul359055G： SABC Dilution Buffer，1x10ml*359055H： TMB Substrate，1x10ml359055J： Stop Solution，1x10ml359055K： Wash Buffer （25X），1x30mlStorage and Stability：Store unopened *359055A at 4oC; store at -20oC once opened. Store unopened *359055B at 4°C; once reconstituted store at 4°C for up to 12 hours or at -20°C for up to 48 hours. Store *359055F and *359055H in the dark at 4°C. Store all other components at 4°C. Kit is stable for 6 months after receipt. For maximum recovery of product，centrifuge the original vials after thawing and prior to removing the cap.Assay Summary：1. Wash plate 2 times before adding standards，samples and control （zero） to wells.2. Add 100ul standard or sample to each well and incubate for 90 minutes at 37°C 3. Aspirate the liquid and wash plate 3 times.3. Add 100ul Antibody-Biotin working solution to each well and incubate for 60 minutes at 37°C4. Aspirate the liquid and wash plate 3 times.5. Add 100ul SABC working solution to each well. Incubate for 30 minutes at 37°C6. Aspirate the liquid and wash plate 5 times.7. Add 90ul TMB substrate. Incubate 15-30 minutes at 37°C8. Add 50ul Stop Solution. Read at 450nm immediately.9. Calculate results.
產品特點
針對STAT3 (Signal transducer and activator of transcription 3) BioAssay ELISA Kit (Human)該產品的特點優勢，歡迎查閱官網提供的產品說明書。
保存建議
建議收到STAT3 （Signal transducer and activator of transcription 3） BioAssay ELISA Kit （Human）產品后將其置于4°C至-20°C保存。
